Hytale server requirements are relatively modest when the goal is to host a few players. However, they increase rapidly as the number of players grows and the worlds become more complex. In these cases, CPU performance and the amount of available memory become the main bottlenecks, especially with many NPCs, active entities or the use of mods.
Below are the minimum Hytale server requirements for a small setup with few players:
- Operating system: macOS, Windows 10/11 (64-bit) or Linux (Ubuntu/Debian 64-bit).
- CPU: x64 or arm64 dual-core processor (3.5 GHz or more recommended).
- RAM: 4 GB minimum (6 GB recommended).
- Storage: 20 GB on SSD (NVMe preferred).
- Network: 2 Mbps bandwidth.
- Required software: Java 25.
If you intend to host more than four players, you will need a more robust server with more CPU cores and greater RAM capacity. In addition to hardware resources, optimization is also essential — tracking server consumption and reducing draw distance helps avoid performance issues that can negatively impact gameplay.
Minimum requirements to run a Hytale server
The minimum requirements for the Hytale server are designed to host up to four players, with little or no use of mods. This type of setup works well for testing, private matches, or small worlds.
CPU
Having an adequate processor is essential to avoid so-called rubber-banding — when the character “returns” to its previous position after moving. This usually happens when CPU usage reaches 100% and the server cannot keep up with the game data loading.
To avoid this problem, the ideal is to use a dual-core x64 or ARM processor, clocked at 3.5 GHz or higher.
RAM
The amount of RAM memory is essential to avoid memory pressure, a situation in which the server runs out of physical RAM and starts using the disk to store temporary data. As SSDs and HDDs are much slower than RAM, this causes noticeable performance drops, especially during memory cleaning cycles.
In practical terms, 4GB of RAM is the absolute minimum. For a more stable and fluid experience, 6 GB is recommended.
Storage
As players explore the world, new chunks are constantly written to disk, increasing read and write operations. If storage is slow or nearly full, the server may experience rapid pauses when saving or loading data — something players experience as crashes or stutters.
To avoid this type of problem, use at least 20 GB of SSD storage. NVMe SSDs offer even better performance and are the best option.
In addition to CPU, RAM, and storage, setting up a Hytale server also requires networking, a compatible operating system, and the appropriate software runtime. These requirements tend to remain the same regardless of server size, while CPU, memory, and disk space need to grow as you add more players or mods.
Hytale Server Recommended Hardware Specifications by Size
As the server grows, hardware requirements increase rapidly. As a voxel-based game, with complex world generation and many real-time simulations, Hytale’s performance scales directly with the number of players, draw distance and use of mods.
THE RAM consumptionin particular, increases significantly when the viewing distance is greater, as more chunks of the world need to be loaded into memory for each player. Mods extend this use even further by adding scripts, extra features, and background processes.
THE CPU performance is equally important. While more cores help handle multiple tasks at the same time, good performance per core — ideally 3.5 GHz or more — is essential to running the game’s core logic without bottlenecks.
See below the recommended requirements for the Hytale server according to the number of players:
| Tier | Number of players | Recommended CPU | Recommended RAM |
|---|---|---|---|
| Tier 1 | Up to 4 players | 3.5 GHz+ dual-core processor | 4 GB (6 GB ideal) |
| Tier 2 | 5–8 players | 3.5 GHz+ quad-core processor | 6 GB (8 GB ideal) |
| Tier 3 | 8–16 players | Quad-core or hexa-core 3.5 GHz+ processor | 10 GB (16 GB ideal) |
| Tier 4 | More than 16 players | 3.5 GHz+ octa-core processor | At least 16GB |
It is also recommended to use a CPU with multithreading support, as virtual cores help improve overall server performance.
In the case of servers with mods, the requirements become less predictable. A rule of thumb is to choose a level above that indicated by the number of players. For example, a server with many mods and only four players should use Tier 3 specs to ensure stability and good performance.
Software and operating system requirements for Hytale server
Hytale servers are compatible with different platforms, but depend on some specific software requirements to function correctly:
- Operating system: It is possible to use Windows, macOS or, preferably, Linux, as long as the system is 64 bits.
- Java Runtime: The Hytale server requires Java 25 or higher, with a recommendation for the Adoptium distribution.
- Additional dependencies: In Linux environments, you may need to install tools like screen or tmux to keep the server running in the terminal.
It is also important to have basic knowledge of Java, as configuring the server requires manually defining the amount of memory available for the game through specific parameters:
- -Xms. Sets the initial amount of memory allocated (start size).
- -Xmx. Sets the maximum memory limit that the server can use.
For example, to allocate 8GB RAMyou should use the parameters –Xms8G -Xmx8G. In general, it is good practice to keep both values the same, avoiding performance variations caused by dynamic memory adjustments while the server is running.
Network Requirements for Hytale Servers
Hytale uses a more modern network architecture when compared to older games, such as Minecraft, which directly impacts performance and latency.
- Port and protocol. By default, Hytale uses UDP port 5520. Using UDP allows for faster data transmission and lower latency compared to games that still rely on TCP.
- Firewall. Make sure UDP port 5520 is free and correctly redirected on the firewall or router.
- Bandwidth. Bandwidth consumption varies depending on viewing distance and player behavior, especially when quickly exploring areas that are not yet loaded. In normal activities — such as mining, construction, and casual exploration — bandwidth usage is relatively low. Customer upload is often below 250 Kbit/s, while server upload grows according to the number of players and intensity of activity. In more extreme scenarios, consider the following reference values:
- 192 blocks . Minimum 2 Mbps, 4 Mbps recommended.
- 384 blocks . Minimum 4.5 Mbps, 7 Mbps recommended.
- 480 blocks . Minimum 6 Mbps, 10 Mbps recommended.
- Latency and reliability. A low ping is essential to ensure responsive combat and fluid interactions.
- Reliability. For public servers, protection against DDoS attacks is essential to avoid outages and keep the server online consistently.
Storage Requirements
The use of SSD is highly recommended, as traditional HDs tend to cause noticeable stutters when loading chunks and generating the world. A SATA SSD meets the minimum requirements, but NVMe SSDs offer superior performance, especially on servers with heavy exploration or frequent loading of new areas.
Hypixel Studios recommends at least 10GB of available space, but 20GB It’s a safer choice for the long term.
The size of the world is growing rapidly. To give you an idea, an area of 5,000 × 5,000 blocks can surpass 600MB. The use of mods and personalized content further increases space consumption, so it is important to plan storage with future growth in mind.
On public servers, it is worth setting up regular automatic backups to ensure the security of player data, as updates and crashes can occur during the game’s early access phase.
Hytale Dedicated Server Optimization Tips
Optimizing a Hytale dedicated server is essential to maintaining good performance as the number of players increases. The following are some important practices to ensure stability and fluid gameplay:
- Limit viewing distance. View distance defines how far the game renders terrain, objects and details, measured in chunks. Reducing this value greatly reduces CPU and RAM usage, directly impacting server performance.
- Use fast storage and scheduled backups. NVMe SSDs, with higher read and write speeds, significantly reduce data loading times. Additionally, schedule automatic backups for times of lower use, avoiding server overload and possible crashes.
- Monitor resource usage. Regularly monitor CPU and RAM consumption via system manager or provider monitoring tools. If usage frequently exceeds 90%, it’s worth considering upgrading your plan or adjusting your game settings.
- Choose the server closest to the players. On public servers, hosting the game in a data center close to the player base reduces latency and ensures a more responsive experience.
For a more in-depth look at tuning your system, read our guide on optimizing a game server.
Is it worth hosting Hytale yourself or using a hosting service?
Hosting a Hytale server yourself can work for testing or private play, but it has clear limitations. Your computer needs to be online all the time and exposing your home network IP can pose security risks.
For reliable multiplayer hosting, a professional hosting provider is the best option. A virtual private server hosting solution gives you the power and control of a dedicated environment, but without the hassle of managing the hardware yourself.
When choosing the best Hytale server hosting, it is worth paying attention to some key points: consistent performance, good provider reputation and extra features such as a management panel, easy scalability, monitoring tools and DDoS protection.
WA Affordable Web Design Agency’s Hytale VPS hosting options meet all recommended requirements, including NVMe storage , DDoS protection , automatic backups and the ability to update features without downtime. With 99.99% uptime guaranteeyour server remains online and ready to play whenever players want.
Semua konten website tutorial ini screenah melalui peninjauan menyeluruh sesuai editorial standards and values of WA Affordable Web Design Agency.
[ad_2]